Darkroom Techniques Table of ContentsDarkroomSource

Skip to: [content] [navigation]


If this page takes more than a minute to load, you might want to refresh your browser

Basic Darkroom Techniques: Techniques

Developing B&W film

All about developing 35mm Black and White film

Loading a tank

Loading a daylight rollfilm tank

Contact Sheet

Making a contact sheet

B&W Print

Making a B&W print

B&W Test Print

Making a B&W test print

Developing B&W prints

Developing B&W prints

Cropping prints

Cropping prints

Dodging B&W prints

Dodging B&W prints

Burning in B&W prints

Burning in B&W prints

Edge Burn in

Edge light fall off and how to edge burn

Drydown

How to handle the drydown effect

Kodak Course

The complete Kodak Darkroom Course

Agfa B&W Lab Course

Comments

Just a quick tip for some newcomers that may just be starting out in the darkroom. I somtimes print a negative that produces almost no density in a highlight. If this happens I use a little raw developer on a cotton ball. While the print is developing remove it from the developer briefly and swab the trtouble area with the raw developer, re-immerse and observe the results. I have used this little trick for years and it works well in most instances. you may heve to do it several times during the developing out of the print.
Contributed by Frank Bowing (frabow@onslowonline.net) on December 18, 1998.

Visitor Comments

The comments stated below are not necessarily the opinions of Andy Hughes or DarkroomSource

Just a quick tip for some newcomers that may just be starting out in the darkroom. I somtimes print a negative that produces almost no density in a highlight. If this happens I use a little raw developer on a cotton ball. While the print is developing remove it from the developer briefly and swab the trtouble area with the raw developer, re-immerse and observe the results. I have used this little trick for years and it works well in most instances. you may heve to do it several times during the developing out of the print.
Contributed by   on 1999-12-18 00:00:00

I know and you know, that when you are working at what you are creating, you can feel it, when it's right. It's well worth the time and effort you put into it. I feel that when I photograph and develop, or print for others as well. Something inside that can be beyond words.
Contributed by   on 2001-01-30 00:00:00

Text Size +R